Comments
-
That is correct, only that port works, unless you install the 9.92n version of the firmware, but better check into all the issues that will happen to your config when you install it. Your Cloud BACKUPS disappear, and I was unable to roll back to the previous version unless I put the TZ600P into Smart Mode. Sonicwall…
-
This was resolved weeks ago, by simply restarting my TZ600P and the Sonicwave device. But Thank you.
-
The POE solved the problems with 8.89n version of the TZ600P firmware with me getting the Power warning message about 802.3AT is not supported put in low power mode. I had the Sonicwave 224w in Low Power profile, but still got the warning, but the unit worked, except for the LAN ports with version 8.89n. When the 12V power…
-
Sonicwall support replied to me this morning, " the ports on the Access Point default to the network from where the AP is provisioned. There is no configuration to move those to a different VLAN. They will stay on the X5 network only". X5 is the interface on the TZ600P that the Sonicwave 224w is plugged into.
-
I did not know that this version broke the cloud backups. I emailed Support Technician that I was working with and asked him when that was going to be fixed. First time I have run into a problem like this. The last problem I had with failover was the sonicwall pingable site was not always up, so failover failed because it…
-
Updating the firmware on my TZ600P to the latest and greatest resolved all the issues with the LAN ports. As a matter of fact. all; the LED lights on the unit now are working, and showing LAN traffic, and that the 5G and 2.4G antennas are working. Sonicwall needs to update their Deployment guide on this unit as it does not…
-
I agree, there documentation lacks. Not much on the AP at all, and what is there does not cover every hardware and software configuration.
-
The release notes on the new firmware version do discuss a fix for Wlan to LAN port, so applied the firmware latest version, and will retest the LAN ports. I have customer issues I need to work on now, should get back to the group in a bit.
-
Hi Larry, When I opened a support case, they are now telling me that I need to be on the most recent version of the firmware, which is not the one listed in the deployment guide. I am on a newer version than the one in the deployment guide, They want me to download is 6.5.4.9-92n, which will update the sonicwave. I…
-
the deployment guide is not useful at all, especially if you ordered an external power supply because none of the POE units for this Sonicwave model are available anywhere. I have the Sonicwall TZ600 Interface X5 plugged into the POE In on the bottom of the unit, the only port that works. The LAN ports DO NOT seem to work.…